Spare parts for forestry AGROMAS KF-817, Onezhets 310, 395, 460, etc.

WHEELED VEHICLES

Loading and transporting machine (forwarder) KF-817
The ability of the cab to rotate 270° and tilt forward and backward allows the operator to always look straight ahead while working with the crane, as well as reduce the load on the neck and the upper part of the spine. Cameras located in front and behind allow you to determine the distance during maneuvering in the forest. The hydraulic suspension of the cab reduces vibration, thereby increasing the comfort of driving on forest roads. The tilt of the cab forward, backward and to the sides optimizes the operator's working position depending on the terrain. A long distance from the seat to the pedals.

Felling-knot-cutting-bucking machine (harvester) KH-451
Among the main advantages of the machine is the high feed rate of materials – about 7 m per second, which is 70 m3 per hour (about 120 trees). The harvester is equipped with a measuring system that allows you to control the volume, number and length of trees. As a result, not only the speed of work is ensured, but also the high quality of pruning branches. The harvester is capable of operating in harsh climatic conditions at temperatures up to -40 ° C, and the machine can simultaneously move and work on slopes with a slope of up to 35 °.

TRACKED VEHICLES

Skidding choker machine Onezhets 320
The Onezhets 320 machine is designed to replace the TLT-100A-06 skidding machine. The car is equipped with a new cab, reinforced frame, high-terrain running system with a wide track and planetary on-board gearboxes with larger diameter driving wheels close to the support surface.

Skidding machine without a lock Onezhets 330
The Onezhets 330 machine is designed to replace the TB-1MA-15 skidding machine, equipped with a SF-65L hydraulic manipulator and a clamping cone. The machine is designed for chokeless skidding of forests, is used year-round in logging of main and intermediate use, mainly in logging areas with rough terrain, drained soils, soils with low load-bearing capacity and with deep snow virgin.

Tracked sorting truck Onezhets 350
The Onezhets 350 machine is designed to replace the TB-1MA-16 skidding machine. The Onezhets 350 tracked sorting truck with a wheeled semi-trailer is designed for collecting, loading, transporting and unloading sortings when moving them from the cutting area, as well as performing sorting operations by species and lengths during loading, unloading and warehousing of sortings.

Forestry tractor Onezhets 380
The machine is equipped with a hydraulic winch, a body and a rear lifting device for aggregating with various forestry implements. With the help of a pusher, it can perform work on the preparation of drags, loading platforms, on the repair of whiskers and roads, on the hoeing of bundles of trees and whips on loading platforms.

Mulcher Onezhets 390
The machine is designed for shredding vegetation and branches in the forest, as well as for shredding trunks, maintenance of road exclusion zones, power lines and municipal tasks in parks and squares. The machine can also be used for the disposal of cut branches, primary preparation of land for agricultural use, crushing organic residues into biomass.

Tractor with dump truck body Onezhets 392
The tractor with a dump truck body Onezhets 392 is designed for the transportation of bulk cargo (sand, gravel, peat, etc.). Equipping the tractor with an all-terrain running system with a wider track and two-stage on-board gearboxes with larger diameter driving wheels close to the support surface allows it to be used on soils with low load-bearing capacity, including waterlogged soils and swamps.

Onezhets-395 drilling and crane machine
The Onezhets 395 drilling and crane machine is designed for drilling pits in soils of 1-4 categories and installing supports during the construction and repair of power lines, as well as on communication lines.

The machine is basic Onezhets 400
The basic Onezhets 400 machine without a shield and a winch is the basic machine for aggregating with mounted technological equipment (log loaders, lockless machines, felling and skidding machines, tunneling complex, drilling and crane machines, exploration drilling units, welding units, etc.). The speed of movement (calculated, without load, with a coefficient of resistance to movement of 0.1) and the pulling force on the hook at rated engine power.

Timber loader jaw Onezhets 460
The jaw loader "Onezhets 460" is designed for loading timber onto logging vehicles to move it from the cutting area along portages, mustaches and logging roads to an intermediate warehouse, stacking timber, as well as during the construction of temporary logging roads (mustaches) and other loading and unloading operations at forest warehouses and transshipment bases of logging enterprises, in lowland conditions and poorly intersected terrain, with slopes up to 5 °, on soils with a bearing capacity of at least 0.1 MPa, snow cover up to 1 m deep and ford depth up to 0.8 m.

FOREST FIRE EQUIPMENT

Forest fire truck Onezhets 310
The Onezhets 310 machine is designed to replace the LHT-100A-12 forest fire tractor. The car is equipped with a new cab, reinforced frame, high-terrain running system with a wider track and planetary on-board gearboxes with larger diameter driving wheels close to the support surface.

Spare parts catalog

Questionnaire